POSEIDON-300 — HV Yellow

Due to differences in monitor settings and lighting conditions, the actual colour of the fabric may slightly differ from what you see on your screen.

POSEIDON-300

300 g/m²|80% Cotton, 19% Polyester, 1% Carbon Antistatic|Twill 2/2

  • Antistatic
  • Flame Retardant
  • Multi risk

14,56 €

Sufficient stock

per meter · ex. VAT·VAT calculated at checkout

  • Cut to length from 1 m — a full roll is 50–70 m
  • Wholesale from 60 m — request a quote

Colour:HV Yellow

m

Documents:Technical datasheet (PDF)

Samples & catalogue — by post

  • Free delivery on EU orders over €100 (incl. VAT). Delivery details
  • 14-day right of withdrawal for consumer orders. Returns policy
  • Secure payment — bank transfer or card via Stripe.
Buying in volume? Open a trade accountPersonal wholesale pricing, a dedicated manager and priority stock for garment makers.

Poseidon 300 is a high quality poly-cotton fabric with a high cotton content improved by the addition of polyester and antistatic yarn. It has been developed for workers in the oil and gas industry and is suitable for use in both jackets and trousers for rig chiefs and uniforms for oil pipeline workers. The modern 2/2 twill weave fabric is very comfortable to wear, has much better tear resistance than pure cotton and has excellent antistatic properties. An optional Multi-Risk treatment makes it water repellent and resistant to acids, alkalis, grease and oil. This FR fabric protects against Heat & Flame, Electric Arc and has Multi-Risk protection. Poseidon-300 is certified to ISO 13034, ISO 11611, ISO 11612, EN 1149-5. Testing for these standards has been carried out in AITEX (Spain) and BTTG (UK) laboratories.

Certified performance

Industrial wash

50 × 75°C

EN ISO 15797, tumble-dried

Certified after 50 full industrial laundry cycles at 75°C (70°C tumble drying, EN ISO 15797, table 4 procedure 2) — the regime used by professional workwear laundries. Flame protection (A1/A2) held even after 100 industrial cycles.
PDry cleaning

1 cycle

EN ISO 3175-2

The certified performance was evaluated after 1 professional dry-cleaning cycles using EN ISO 3175-2. Follow the finished garment's care label.
Arc rating

9.6 cal/cm²

ATPV · ELIM 8.2 cal/cm² · APC 1

Blocks 9.6 cal/cm² of electric-arc energy before a 50% burn probability (ATPV, IEC 61482-1-1 open arc), with 8.2 cal/cm² ELIM (no-burn threshold). Also holds Arc Protection Class 1 in the EN 61482-2 box test after 50 industrial washes.
Chemical splash

Type 6

EN 13034 — acid & alkali splash

EN 13034 Type 6 testing evaluates repellency and resistance to penetration for specified test liquids under limited-splash conditions. Results do not cover every chemical or exposure scenario.
Antistatic

EN 1149-5

passes after 50 industrial washes

The measured half-decay time is <0.01 s under the EN 1149-3 induction method. This material result is only one part of a safe garment system; correct design, wear and earthing still matter.

Certified to

EN ISO 11612Heat & flame protection — A1 A2 B1 C1 D1 E3 F1
Heat- and flame-protective clothing
The core industrial heat-and-flame standard. Code letters grade each hazard: A flame spread, B convective heat, C radiant heat, D molten aluminium, E molten iron, F contact heat — higher numbers, better protection.
Verified after 50 industrial washes at 75°C.
EN ISO 11611Welding & allied processes — Class 1
Welding protective clothing
For welders’ clothing: withstands small molten-metal splashes (28 drops — Class 2 level), radiant heat and flame, with electrical insulation above 10⁵ Ω.
Verified after 50 industrial washes at 75°C.
EN 61482-2Electric arc — APC class — APC 1
Electric-arc protective clothing (box test)
Protection against the thermal hazards of an electric arc: Arc Protection Class in the constrained-arc box test, plus flame spread, heat resistance and strength — all verified after washing.
Verified after 50 industrial washes at 75°C.
EN 61482-1-1ATPV / ELIM rating — ATPV 9.6 cal/cm²
Arc rating — open arc method
The open-arc test that yields the ATPV and ELIM values used to match a garment to the prospective arc-flash energy of a workplace.
Verified after 5 washes at 60°C.
EN 1149-5Antistatic (ATEX areas) — S 0.5
Electrostatic-dissipative clothing
For electrostatic-dissipative protective clothing used in explosive atmospheres: EN 1149-3 measures material charge decay, while EN 1149-5 sets material performance and garment design requirements.
Verified after 50 industrial washes at 75°C.
EN 13034Light chemical splash — Type 6
Chemical-splash protective clothing
Type 6 protection: repellency and penetration resistance against light splashes of liquid chemicals (sulphuric acid, sodium hydroxide, o-xylene, butanol), plus abrasion, tear, tensile and puncture classes.
Verified after 5 washes at 60°C.
EN ISO 20471Hi-vis workwear — HV Yellow
High-visibility clothing
The EU standard for garments that must keep you visible day and night. Colour, luminance and retroreflection are tested new and after washing, abrasion, flexing, cold folding, temperature swings and rain.
Verified after 5 washes at 60°C.
OEKO-TEX® STANDARD 100Tested for harmful substances — Product Class IIValid until August 15, 2026 · Certificate BEWO 084394
Independent OEKO-TEX® institutes test every component of the fabric — fibres, dyes and finishes — against the STANDARD 100 criteria catalogue of harmful substances, to Product Class II requirements (certified safe for direct skin contact). Certificate BEWO 084394 is valid until August 15, 2026 and can be verified by anyone with the OEKO-TEX® Label Check at oeko-tex.com.

Industrial wash, domestic wash and dry cleaning — what's the difference?

Industrial laundering. EN ISO 15797 simulates professional industrial laundry with controlled washing and finishing procedures.

Domestic laundering. EN ISO 6330 uses standardized household-machine programmes. It is not the same as industrial laundering; follow the finished garment's care label.

P

Professional dry cleaning. A defined professional solvent-cleaning procedure. It does not cover every solvent or process; follow the finished garment's care label.

Details & Care

  • Normal wash at water temperature up to 60°C
  • Bleaching is prohibited
  • Gentle tumble drying at a reduced temperature of 60°C, reduced drying time and reduced load size
  • Ironing at a soleplate temperature of up to 150 °C - corresponds to the symbol in the form of two dots on the iron's thermostat
  • Normal dry cleaning using tetrachloroethylene

Area of use: Heat and Flame Protection Clothing

Specifications

Width?Usable width of the fabric roll. The ± value is the standard production tolerance.152 ± 2 cm
Weight?Fabric surface density in grams per square meter (g/m²). Higher = denser, heavier fabric.300 g/m²
Weave?How the yarns are interlaced. Twill weaves are diagonal-ribbed, durable and drape well.Twill 2/2
Composition?Fibre content of the fabric in percent.80% Cotton, 19% Polyester, 1% Carbon Antistatic
Colours?Number of stock colours available for this fabric.7 in stock
Sold per?The unit one piece of this product is priced and cut by.meter
Minimum order?Smallest wholesale quantity per colour. Retail orders start from a single unit — 1 m.60 m (wholesale) · 1 m (retail)

You may also need

Lizard profire 30/3
+1 colours

Sewing Accessories & Components

Lizard profire 30/3

100% Meta-Aramid

from 12,61 € /pc · ex. VAT

FR garments must be sewn with FR-rated thread — regular thread melts

Buckle FR 30mm, LM30 BLACK (100pc/packs)

Sewing Accessories & Components

Buckle FR 30mm, LM30 BLACK (100pc/packs)

Buckles

25,88 € / pack of 100 pcs · ex. VAT

Flame-resistant buckle

XM-6132 FR-PIPING

Reflective Tapes & Films

XM-6132 FR-PIPING

100% Cotton

37,00 € / 50 m roll · ex. VAT

FR-certified reflective piping, EN 20471

Vislon zipper closed end

Sewing Accessories & Components

Vislon zipper closed end

Zippers

from 11,50 € / pack of 50 pcs · ex. VAT

Closed-end zipper for coveralls

Similar fabrics

ITAKA-300

ITAKA-300

300 g/m² | 46% Modacrylic, 25% Polyester, 12% Cellulose, 8% Aramid, 8% Polyamide, 1% Carbon Antistatic

21,76 € /m · ex. VAT

POSEIDON-245

POSEIDON-245

245 g/m² | 80% Cotton, 19% Polyester, 1% Carbon Antistatic

from 7,46 € /m · ex. VAT

SPARK-170

SPARK-170

170 g/m² | 100% Cotton

from 4,51 € /m · ex. VAT

KEON-280

KEON-280

280 g/m² | 87% Cotton, 12% Nylon, 1% Carbon Antistatic

from 8,11 € /m · ex. VAT

Frequently asked questions

Can I order less than a full roll?

Yes — every fabric can be cut to length from one metre at the listed price, with no cutting surcharge. A full roll (50–70 m of fabric, 100 m of reflective tape) is the better deal for production runs: trade accounts get individual roll and volume pricing.

How long does delivery take?

Orders ship from warehouse stock in Poland, Romania and Portugal: 1–2 business days within Poland, 2–7 business days across the EU, 4–10 outside it. Orders of €100 or more (incl. VAT) ship free to every EU country.

Do the prices include VAT?

Catalogue prices are shown ex-VAT, because the correct rate depends on who is buying and where the order ships from. Checkout shows the exact VAT for your order before you pay — EU businesses with a valid VAT number buy cross-border at 0% under reverse charge.

Is the stock reserved once I order?

Yes. The moment you place an order, the quantity is booked for you in the warehouse for seven days — time enough to arrange payment and paperwork. Availability shown on this page is live warehouse stock.

Can I return fabric?

Uncut rolls and packed accessories — yes, consumers have the statutory 14-day withdrawal right. Fabric cut to your metreage is exempt by EU law (it is cut for you from a larger roll), so order a test metre first if you need to verify the material. Details in the returns guide.