English
Polski
Română
Italiano
Español
Português
Magyar
Lietuvių
Ελληνικά
Čeština
Due to differences in monitor settings and lighting conditions, the actual colour of the fabric may slightly differ from what you see on your screen.
Reflective Tape XM-8011 in silver colour with flame retardant properties. Designed for heat transfer application to FR workwear and firefighter clothing. This silver heat transfer reflective tape is designed for high visibility use by firefighters, oil and gas workers, police, etc. XM-8011 tape withstands 50 wash cycles at 60°C and is certified to EN 469 and EN 20471. It is used for FR rainwear (jacket, trousers, etc) or FR jackets, trousers, overalls where stitching is not recommended. XM-8011 is a high tech material and its adhesive properties vary depending on the type of FR fabric. We advise you to test the adhesion of the tape on a specific FR garment before using it for the first time. It is also a good idea to do a test wash of FR garments with the reflective tape applied. Please use a heat press or iron to apply the reflective tape to your FR garment. Do not dry clean. This reflective material is a PU+polyester resin with numerous glass micro-lenses impregnated into the adhesive layer and placed on a film liner. Light is reflected from these micro-lenses and bounces back to a car (or other light sources), making the person wearing the reflective tape more visible in the dark.
XM-8011 MALTA HT
100% FR Polyester
- Flame RetardantSelf-extinguishing — protects against flame, sparks and radiant heat
- High VisibilityFluorescent colour for high-visibility protective clothing
99,00 €
Sufficient stock
per 100 m roll · ex. VAT·VAT calculated at checkout
= 0,99 € / meter
- Supplied in full rolls — 1 roll = 100 m
Width:50 mm
Documents:Technical datasheet (PDF)
Catalogue — by post
- Free delivery on EU orders over €100 (incl. VAT). Delivery details
- 14-day right of withdrawal for consumer orders. Returns policy
- Secure payment — bank transfer or card via Stripe.
Reflective Tape XM-8011 in silver colour with flame retardant properties. Designed for heat transfer application to FR workwear and firefighter clothing. This silver heat transfer reflective tape is designed for high visibility use by firefighters, oil and gas workers, police, etc. XM-8011 tape withstands 50 wash cycles at 60°C and is certified to EN 469 and EN 20471. It is used for FR rainwear (jacket, trousers, etc) or FR jackets, trousers, overalls where stitching is not recommended. XM-8011 is a high tech material and its adhesive properties vary depending on the type of FR fabric. We advise you to test the adhesion of the tape on a specific FR garment before using it for the first time. It is also a good idea to do a test wash of FR garments with the reflective tape applied. Please use a heat press or iron to apply the reflective tape to your FR garment. Do not dry clean. This reflective material is a PU+polyester resin with numerous glass micro-lenses impregnated into the adhesive layer and placed on a film liner. Light is reflected from these micro-lenses and bounces back to a car (or other light sources), making the person wearing the reflective tape more visible in the dark.
Certified performance
Certified to
Details & Care
Normal wash at water temperature up to 60°C
Bleaching is prohibited
Gentle tumble drying at a reduced temperature of 60°C, reduced drying time and reduced load size
Ironing at a soleplate temperature of up to 110 °C - corresponds to the symbol in the form of a single dot on the iron's thermostat. Ironing with steam can cause irreversible damage to the material being processed
Dry cleaning is prohibited
Area of use: Heat and Flame Protection Clothing, High Visibility Clothing
Specifications
| Widths?Available tape widths — each width is a separate article. | 50 mm · 70 mm |
|---|---|
| Composition?Fibre content of the fabric in percent. | 100% FR Polyester |
| Sold per?The unit one piece of this product is priced and cut by. | roll (100 m) |
| Minimum order?Sold in whole rolls — the smallest order is one roll. | 1 roll (100 m) |
You may also need
Workwear & ESD Fabrics
NEPTUN-245
245 g/m² | 50% Polyester, 50% Cotton
from 3,59 € /m · ex. VAT
Hi-vis fabric this tape is applied to
Outdoor Fleece & Mesh Fabrics
POLAR FLEECE-270N
270 g/m² | 100% Polyester
from 6,64 € /kg · ex. VAT
Hi-vis fabric this tape is applied to
Outdoor Fleece & Mesh Fabrics
LINING MESH-100
100 g/m² | 100% Polyester
from 7,51 € /kg · ex. VAT
Hi-vis fabric this tape is applied to
Workwear & ESD Fabrics
ECO-210
210 g/m² | 65% Polyester, 35% Cotton
from 1,51 € /m · ex. VAT
Workwear fabric this tape is applied to
Similar products
Frequently asked questions
Can I order less than a full roll?
Yes — every fabric can be cut to length from one metre at the listed price, with no cutting surcharge. A full roll (50–70 m of fabric, 100 m of reflective tape) is the better deal for production runs: trade accounts get individual roll and volume pricing.
How long does delivery take?
Orders ship from warehouse stock in Poland, Romania and Portugal: 1–2 business days within Poland, 2–7 business days across the EU, 4–10 outside it. Orders of €100 or more (incl. VAT) ship free to every EU country.
Do the prices include VAT?
Catalogue prices are shown ex-VAT, because the correct rate depends on who is buying and where the order ships from. Checkout shows the exact VAT for your order before you pay — EU businesses with a valid VAT number buy cross-border at 0% under reverse charge.
Is the stock reserved once I order?
Yes. The moment you place an order, the quantity is booked for you in the warehouse for seven days — time enough to arrange payment and paperwork. Availability shown on this page is live warehouse stock.
Can I return fabric?
Uncut rolls and packed accessories — yes, consumers have the statutory 14-day withdrawal right. Fabric cut to your metreage is exempt by EU law (it is cut for you from a larger roll), so order a test metre first if you need to verify the material. Details in the returns guide.